dmesg - Laptop 3
microcode: microcode updated early to revision 0xd6, date = 2020-04-27
Linux version 5.7.0-999-generic (kernel@tangerine) (gcc version 9.3.0 (Ubuntu 9.3.0-13ubuntu1), GNU ld (GNU Binutils for Ubuntu) 2.34) #202005302200 SMP Sun May 31 02:03:21 UTC 2020
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000067457fff] usable
BIOS-e820: [mem 0x0000000067458000-0x0000000067d57fff] reserved
BIOS-e820: [mem 0x0000000067d58000-0x000000007df6efff] usable
BIOS-e820: [mem 0x000000007df6f000-0x000000007f59efff] reserved
BIOS-e820: [mem 0x000000007f59f000-0x000000007fc8efff] ACPI NVS
BIOS-e820: [mem 0x000000007fc8f000-0x000000007fd0efff] ACPI data
BIOS-e820: [mem 0x000000007fd0f000-0x000000007fd0ffff] usable
BIOS-e820: [mem 0x000000007fd10000-0x000000008d7fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff600000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000008707fffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x64940018-0x6495fe57] usable ==> usable
e820: update [mem 0x64940018-0x6495fe57] usable ==> usable
e820: update [mem 0x6492f018-0x6493f057] usable ==> usable
e820: update [mem 0x6492f018-0x6493f057] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009efff] usable
reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x000000006492f017] usable
reserve setup_data: [mem 0x000000006492f018-0x000000006493f057] usable
reserve setup_data: [mem 0x000000006493f058-0x0000000064940017] usable
reserve setup_data: [mem 0x0000000064940018-0x000000006495fe57] usable
reserve setup_data: [mem 0x000000006495fe58-0x0000000067457fff] usable
reserve setup_data: [mem 0x0000000067458000-0x0000000067d57fff] reserved
reserve setup_data: [mem 0x0000000067d58000-0x000000007df6efff] usable
reserve setup_data: [mem 0x000000007df6f000-0x000000007f59efff] reserved
reserve setup_data: [mem 0x000000007f59f000-0x000000007fc8efff] ACPI NVS
reserve setup_data: [mem 0x000000007fc8f000-0x000000007fd0efff] ACPI data
reserve setup_data: [mem 0x000000007fd0f000-0x000000007fd0ffff] usable
reserve setup_data: [mem 0x000000007fd10000-0x000000008d7fffff] reserved
reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
reserve setup_data: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
reserve setup_data: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff600000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x00000008707fffff] usable
efi: EFI v2.60 by INSYDE Corp.
efi: ACPI=0x7fd0e000 ACPI 2.0=0x7fd0e014 TPMFinalLog=0x7f595000 SMBIOS=0x7e322000 SMBIOS 3.0=0x7e320000 ESRT=0x7e323698 MEMATTR=0x6e32f018 RNG=0x7e31d998 TPMEventLog=0x67d68018
efi: seeding entropy pool
random: fast init done
SMBIOS 3.0.1 present.
DMI: Notebook P95_96_97Ex,Rx /P95_96_97Ex,Rx , BIOS 1.07.13MIN29 10/01/201
tsc: Detected 2600.000 MHz processor
tsc: Detected 2599.992 MHz TSC
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x870800 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00A0000000 mask 7FE0000000 uncachable
2 base 0090000000 mask 7FF0000000 uncachable
3 base 008C000000 mask 7FFC000000 uncachable
4 base 008A000000 mask 7FFE000000 uncachable
5 base 0089000000 mask 7FFF000000 uncachable
6 base 2000000000 mask 6000000000 uncachable
7 base 1000000000 mask 7000000000 uncachable
8 base 4000000000 mask 4000000000 uncachable
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0x7fd10 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x000000007e323698 to 0x000000007e323720.
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
BRK [0x577001000, 0x577001fff] PGTABLE
BRK [0x577002000, 0x577002fff] PGTABLE
BRK [0x577003000, 0x577003fff] PGTABLE
BRK [0x577004000, 0x577004fff] PGTABLE
BRK [0x577005000, 0x577005fff] PGTABLE
BRK [0x577006000, 0x577006fff] PGTABLE
BRK [0x577007000, 0x577007fff] PGTABLE
BRK [0x577008000, 0x577008fff] PGTABLE
BRK [0x577009000, 0x577009fff] PGTABLE
BRK [0x57700a000, 0x57700afff] PGTABLE
Secure boot disabled
RAMDISK: [mem 0x31f88000-0x34fa1fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000007FD0E014 000024 (v02 INSYDE)
ACPI: XSDT 0x000000007FCBE188 0000DC (v01 INSYDE CNLH 00000001 01000013)
ACPI: FACP 0x000000007FCF3000 00010C (v05 INSYDE CNLH 00000001 ACPI 00040000)
ACPI: DSDT 0x000000007FCC0000 02F232 (v02 INSYDE CNLH 00000000 ACPI 00040000)
ACPI: FACS 0x000000007FC0D000 000040
ACPI: SSDT 0x000000007FD0B000 001B1C (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
ACPI: SSDT 0x000000007FD07000 0031F3 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
ACPI: SSDT 0x000000007FD05000 001883 (v02 PegSsd PegSsdt 00001000 INTL 20160422)
ACPI: SSDT 0x000000007FD03000 000781 (v01 INTEL Tpm2Tabl 00001000 INTL 20160422)
ACPI: SSDT 0x000000007FCFC000 004A41 (v02 DptfTa DptfTabl 00001000 INTL 20160422)
ACPI: SSDT 0x000000007FCF8000 00166A (v02 INTEL PtidDevc 00001000 INTL 20160422)
ACPI: SSDT 0x000000007FCF5000 000444 (v02 Intel PerfTune 00001000 INTL 20160422)
ACPI: SSDT 0x000000007FCBA000 0036B7 (v01 Insyde NvdTable 00001000 INTL 20160422)
ACPI: UEFI 0x000000007FD0D000 000236 (v01 INSYDE CNLH 00000001 ACPI 00040000)
ACPI: UEFI 0x000000007FD04000 000042 (v01 INSYDE CNLH 00000002 ACPI 00040000)
ACPI: TPM2 0x000000007FD02000 000034 (v04 INSYDE CNLH 00000002 ACPI 00040000)
ACPI: LPIT 0x000000007FCFB000 00005C (v01 INSYDE CNLH 00000002 ACPI 00040000)
ACPI: WSMT 0x000000007FCFA000 000028 (v01 INSYDE CNLH 00000002 ACPI 00040000)
ACPI: DBGP 0x000000007FCF7000 000034 (v01 INSYDE CNLH 00000002 ACPI 00040000)
ACPI: DBG2 0x000000007FCF6000 000061 (v00 INSYDE CNLH 00000002 ACPI 00040000)
ACPI: ASF! 0x000000007FCF4000 0000A5 (v32 INSYDE CNLH 00000001 ACPI 00040000)
ACPI: HPET 0x000000007FCF2000 000038 (v01 INSYDE CNLH 00000001 ACPI 00040000)
ACPI: APIC 0x000000007FCF1000 00012C (v03 INSYDE CNLH 00000001 ACPI 00040000)
ACPI: MCFG 0x000000007FCF0000 00003C (v01 INSYDE CNLH 00000001 ACPI 00040000)
ACPI: DMAR 0x000000007FCBF000 0000A8 (v01 INSYDE CNLH 00000002 ACPI 00040000)
ACPI: FPDT 0x000000007FCB9000 000044 (v01 INSYDE CNLH 00000002 ACPI 00040000)
ACPI: BGRT 0x000000007FCB8000 000038 (v01 INSYDE CNLH 00000001 ACPI 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000008707fffff]
NODE_DATA(0) allocated [mem 0x8707d6000-0x8707fffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x00000008707fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x0000000067457fff]
node 0: [mem 0x0000000067d58000-0x000000007df6efff]
node 0: [mem 0x000000007fd0f000-0x000000007fd0ffff]
node 0: [mem 0x0000000100000000-0x00000008707fffff]
Zeroed struct page in unavailable ranges: 41458 pages
Initmem setup node 0 [mem 0x0000000000001000-0x00000008707fffff]
On node 0 totalpages: 8314382
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 7962 pages used for memmap
DMA32 zone: 509552 pages, LIFO batch:63
Normal zone: 121888 pages used for memmap
Normal zone: 7800832 pages, LIFO batch:63
x86/hpet: Will disable the HPET for this platform because it's not reliable
Reserving Intel graphics memory at [mem 0x89800000-0x8d7fffff]
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
e820: update [mem 0x6db1b000-0x6dc7afff] usable ==> reserved
smpboot: Allowing 12 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x6492f000-0x6492ffff]
PM: hibernation: Registered nosave memory: [mem 0x6493f000-0x6493ffff]
PM: hibernation: Registered nosave memory: [mem 0x64940000-0x64940fff]
PM: hibernation: Registered nosave memory: [mem 0x6495f000-0x6495ffff]
PM: hibernation: Registered nosave memory: [mem 0x67458000-0x67d57fff]
PM: hibernation: Registered nosave memory: [mem 0x6db1b000-0x6dc7afff]
PM: hibernation: Registered nosave memory: [mem 0x7df6f000-0x7f59efff]
PM: hibernation: Registered nosave memory: [mem 0x7f59f000-0x7fc8efff]
PM: hibernation: Registered nosave memory: [mem 0x7fc8f000-0x7fd0efff]
PM: hibernation: Registered nosave memory: [mem 0x7fd10000-0x8d7fffff]
PM: hibernation: Registered nosave memory: [mem 0x8d800000-0xdfffffff]
PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfed0ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
PM: hibernation: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
PM: hibernation: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
PM: hibernation: Registered nosave memory: [mem 0xfed85000-0xfedfffff]
PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xff5fffff]
PM: hibernation: Registered nosave memory: [mem 0xff600000-0xffffffff]
[mem 0x8d800000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
percpu: Embedded 57 pages/cpu s196608 r8192 d28672 u262144
pcpu-alloc: s196608 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- --
Built 1 zonelists, mobility grouping on. Total pages: 8184447
Policy zone: Normal
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Memory: 32442568K/33257528K available (14339K kernel code, 2536K rwdata, 5272K rodata, 2620K init, 4944K bss, 814960K reserved, 0K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=1
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 45582 entries in 179 pages
ftrace: allocated 179 pages with 5 groups
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=12.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
NR_IRQS: 524544, nr_irqs: 2152, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20200326
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000007f574000 end: 0x0000007f593fff
DMAR: RMRR base: 0x00000089000000 end: 0x0000008d7fffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a34a6eea, max_idle_ns: 440795264358 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 5199.98 BogoMIPS (lpj=10399968)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
MDS: Mitigation: Clear CPU buffers
Freeing SMP alternatives memory: 40K
smpboot: CPU0: Intel(R) Core(TM) i7-9750H CPU @ 2.60GHz (family: 0x6, model: 0x9e, stepping: 0xa)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6
MDS CPU bug present and SMT on, data leak possible. See for more details.
#7 #8 #9 #10 #11
smp: Brought up 1 node, 12 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 12 processors activated (62399.80 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x7f59f000-0x7fc8efff] (7274496 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 20:52:53, date: 2020-08-23
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1598215973.052:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 9 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9FB14C38A200 0000F4 (v02 PmRef Cpu0Psd 00003000 INTL 20160422)
ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9FB14BEA9800 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9FB14C4DD800 000581 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9FB14BC76600 00011B (v02 PmRef Cpu0Hwp 00003000 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9FB14C4D9800 000724 (v02 PmRef HwpLvt 00003000 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9FB14C4DC000 0005FC (v02 PmRef ApIst 00003000 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9FB14BEAD000 000317 (v02 PmRef ApHwp 00003000 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9FB14C52A000 000AB0 (v02 PmRef ApPsd 00003000 INTL 20160422)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9FB14BEAB800 00030A (v02 PmRef ApCst 00003000 INTL 20160422)
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 7 GPEs in block 00 to 7F
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [V0PR] (on)
ACPI: Power Resource [V1PR] (on)
ACPI: Power Resource [V2PR] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [PIN] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x8d800000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:3ec4] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:3e9b] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xb5000000-0xb5ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
pci 0000:00:04.0: reg 0x10: [mem 0xb4610000-0xb4617fff 64bit]
pci 0000:00:12.0: [8086:a379] type 00 class 0x118000
pci 0000:00:12.0: reg 0x10: [mem 0xb4624000-0xb4624fff 64bit]
pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xb4600000-0xb460ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000
pci 0000:00:14.2: reg 0x10: [mem 0xb4620000-0xb4621fff 64bit]
pci 0000:00:14.2: reg 0x18: [mem 0xb4625000-0xb4625fff 64bit]
pci 0000:00:14.3: [8086:a370] type 00 class 0x028000
pci 0000:00:14.3: reg 0x10: [mem 0xb4618000-0xb461bfff 64bit]
pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
pci 0000:00:15.0: [8086:a368] type 00 class 0x0c8000
pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
pci 0000:00:15.1: [8086:a369] type 00 class 0x0c8000
pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
pci 0000:00:16.0: [8086:a360] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xb4628000-0xb4628fff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a353] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xb4622000-0xb4623fff]
pci 0000:00:17.0: reg 0x14: [mem 0xb462c000-0xb462c0ff]
pci 0000:00:17.0: reg 0x18: [io 0x5080-0x5087]
pci 0000:00:17.0: reg 0x1c: [io 0x5088-0x508b]
pci 0000:00:17.0: reg 0x20: [io 0x5060-0x507f]
pci 0000:00:17.0: reg 0x24: [mem 0xb462b000-0xb462b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1b.0: [8086:a32c] type 01 class 0x060400
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PTM enabled (root), 4ns granularity
pci 0000:00:1d.0: [8086:a330] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
pci 0000:00:1d.6: [8086:a336] type 01 class 0x060400
pci 0000:00:1d.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.6: PTM enabled (root), 4ns granularity
pci 0000:00:1d.7: [8086:a337] type 01 class 0x060400
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PTM enabled (root), 4ns granularity
pci 0000:00:1f.0: [8086:a30d] type 00 class 0x060100
pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xb461c000-0xb461ffff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xb4200000-0xb42fffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xb4629000-0xb46290ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0x5040-0x505f]
pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000
pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
pci 0000:01:00.0: [10de:1f11] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xb3000000-0xb3ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0x4000-0x407f]
pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
pci 0000:01:00.0: PME# supported from D0 D3hot
pci 0000:01:00.1: [10de:10f9] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xb4000000-0xb4003fff]
pci 0000:01:00.2: [10de:1ada] type 00 class 0x0c0330
pci 0000:01:00.2: reg 0x10: [mem 0xb4100000-0xb413ffff 64bit pref]
pci 0000:01:00.2: reg 0x1c: [mem 0xb4140000-0xb414ffff 64bit pref]
pci 0000:01:00.2: PME# supported from D0 D3hot
pci 0000:01:00.3: [10de:1adb] type 00 class 0x0c8000
pci 0000:01:00.3: reg 0x10: [mem 0xb4004000-0xb4004fff]
pci 0000:01:00.3: PME# supported from D0 D3hot
pci 0000:00:01.0: PCI bridge to [bus 01-05]
pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.0: bridge window [mem 0xa0000000-0xb40fffff]
pci 0000:00:01.0: bridge window [mem 0xb4100000-0xb41fffff 64bit pref]
pci 0000:00:1b.0: PCI bridge to [bus 06]
pci 0000:07:00.0: [144d:a808] type 00 class 0x010802
pci 0000:07:00.0: reg 0x10: [mem 0xb4500000-0xb4503fff 64bit]
pci 0000:00:1d.0: PCI bridge to [bus 07]
pci 0000:00:1d.0: bridge window [mem 0xb4500000-0xb45fffff]
pci 0000:08:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:08:00.0: reg 0x10: [io 0x3000-0x30ff]
pci 0000:08:00.0: reg 0x18: [mem 0xb4404000-0xb4404fff 64bit]
pci 0000:08:00.0: reg 0x20: [mem 0xb4400000-0xb4403fff 64bit]
pci 0000:08:00.0: supports D1 D2
pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1d.6: PCI bridge to [bus 08]
pci 0000:00:1d.6: bridge window [io 0x3000-0x3fff]
pci 0000:00:1d.6: bridge window [mem 0xb4400000-0xb44fffff]
pci 0000:09:00.0: [10ec:525a] type 00 class 0xff0000
pci 0000:09:00.0: reg 0x14: [mem 0xb4300000-0xb4300fff]
pci 0000:09:00.0: supports D1 D2
pci 0000:09:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:1d.7: PCI bridge to [bus 09]
pci 0000:00:1d.7: bridge window [mem 0xb4300000-0xb43fffff]
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: EC: GPE=0x17
ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC initialization complete
ACPI: \_SB_.PCI0.LPCB.EC__: EC: Used to handle transactions and events
iommu: Default domain type: Translated
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:00:02.0: vgaarb: no bridge control possible
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x6492f018-0x67ffffff]
e820: reserve RAM buffer [mem 0x64940018-0x67ffffff]
e820: reserve RAM buffer [mem 0x67458000-0x67ffffff]
e820: reserve RAM buffer [mem 0x6db1b000-0x6fffffff]
e820: reserve RAM buffer [mem 0x7df6f000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7fd10000-0x7fffffff]
e820: reserve RAM buffer [mem 0x870800000-0x873ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x1800-0x18fe] has been reserved
system 00:00: [mem 0xfd000000-0xfd69ffff] has been reserved
system 00:00: [mem 0xfd6c0000-0xfd6cffff] has been reserved
system 00:00: [mem 0xfd6f0000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:00: [mem 0xfe200000-0xfe7fffff] has been reserved
system 00:00: [mem 0xff000000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x2000-0x20fe] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: disabling [io 0x3322-0x3323] because it overlaps 0000:00:1d.6 BAR 13 [io 0x3000-0x3fff]
system 00:02: [io 0x0680-0x069f] has been reserved
system 00:02: [io 0x164e-0x164f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io 0x1854-0x1857] has been reserved
system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
system 00:07: [mem 0xfe037000-0xfe037fff] has been reserved
system 00:07: [mem 0xfe036008-0xfe036fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:08: [mem 0xfed45000-0xfed8ffff] could not be reserved
system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
pci 0000:00:15.0: BAR 0: assigned [mem 0x8d800000-0x8d800fff 64bit]
pci 0000:00:15.1: BAR 0: assigned [mem 0x8d801000-0x8d801fff 64bit]
pci 0000:01:00.0: BAR 6: assigned [mem 0xb2000000-0xb207ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-05]
pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.0: bridge window [mem 0xa0000000-0xb40fffff]
pci 0000:00:01.0: bridge window [mem 0xb4100000-0xb41fffff 64bit pref]
pci 0000:00:1b.0: PCI bridge to [bus 06]
pci 0000:00:1d.0: PCI bridge to [bus 07]
pci 0000:00:1d.0: bridge window [mem 0xb4500000-0xb45fffff]
pci 0000:00:1d.6: PCI bridge to [bus 08]
pci 0000:00:1d.6: bridge window [io 0x3000-0x3fff]
pci 0000:00:1d.6: bridge window [mem 0xb4400000-0xb44fffff]
pci 0000:00:1d.7: PCI bridge to [bus 09]
pci 0000:00:1d.7: bridge window [mem 0xb4300000-0xb43fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x8d800000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xfc800000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:01: resource 1 [mem 0xa0000000-0xb40fffff]
pci_bus 0000:01: resource 2 [mem 0xb4100000-0xb41fffff 64bit pref]
pci_bus 0000:07: resource 1 [mem 0xb4500000-0xb45fffff]
pci_bus 0000:08: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:08: resource 1 [mem 0xb4400000-0xb44fffff]
pci_bus 0000:09: resource 1 [mem 0xb4300000-0xb43fffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
pci 0000:01:00.2: D0 power state depends on 0000:01:00.0
pci 0000:01:00.3: D0 power state depends on 0000:01:00.0
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Initramfs unpacking failed: Decoding failed
fbcon: Taking over console
Freeing initrd memory: 49256K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x792c0000-0x7d2c0000] (64MB)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=23 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
integrity: Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
pcieport 0000:00:01.0: PME: Signaling with IRQ 122
pcieport 0000:00:1b.0: PME: Signaling with IRQ 123
pcieport 0000:00:1b.0: AER: enabled with IRQ 123
pcieport 0000:00:1b.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
pcieport 0000:00:1d.0: PME: Signaling with IRQ 124
pcieport 0000:00:1d.0: AER: enabled with IRQ 124
pcieport 0000:00:1d.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
pcieport 0000:00:1d.6: PME: Signaling with IRQ 125
pcieport 0000:00:1d.6: AER: enabled with IRQ 125
pcieport 0000:00:1d.6: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
pcieport 0000:00:1d.7: PME: Signaling with IRQ 126
pcieport 0000:00:1d.7: AER: enabled with IRQ 126
pcieport 0000:00:1d.7: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: showing boot graphics
efifb: framebuffer at 0x90000000, using 8100k, total 8100k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 240x67
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.5.1 model 0x9E
intel_idle: Local APIC timer is reliable in all C-states
ACPI: AC Adapter [AC] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: Invalid active0 threshold
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ0] (29 C)
hpet_acpi_add: no address or irqs in _CRS
Linux agpgart interface v0.103
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1B, rev-id 22)
tpm tpm0: tpm_try_transmit: send(): error -5
tpm tpm0: [Firmware Bug]: TPM interrupt not working, polling instead
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.7.0-999-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.07
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.7.0-999-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
xhci_hcd 0000:01:00.2: xHCI Host Controller
xhci_hcd 0000:01:00.2: new USB bus registered, assigned bus number 3
xhci_hcd 0000:01:00.2: hcc params 0x0180ff05 hci version 0x110 quirks 0x0000000000000010
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.7.0-999-generic xhci-hcd
usb usb3: SerialNumber: 0000:01:00.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:01:00.2: xHCI Host Controller
xhci_hcd 0000:01:00.2: new USB bus registered, assigned bus number 4
xhci_hcd 0000:01:00.2: Host supports USB 3.1 Enhanced SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.07
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.7.0-999-generic xhci-hcd
usb usb4: SerialNumber: 0000:01:00.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
battery: ACPI: Battery Slot [BAT0] (battery present)
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: registered as rtc0
rtc_cmos 00:03: setting system clock to 2020-08-23T20:52:55 UTC (1598215975)
rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: Intel P-state driver initializing
intel_pstate: Disabling energy efficiency optimization
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
intel_pmc_core intel_pmc_core.0: initialized
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x906ea, pf=0x20, revision=0xd6
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (2494801626, 8991028)->(2540393091, -36600437)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: e62f0c25928c18f7fab76efb1e42b6b7e97acd1a'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 0:204:903
usb usb2-port4: hash matches
Freeing unused decrypted memory: 2040K
Freeing unused kernel image (initmem) memory: 2620K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image (text/rodata gap) memory: 2044K
Freeing unused kernel image (rodata/data gap) memory: 872K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
with arguments:
/init
splash
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/vmlinuz-5.7.0-999-generic
usb 1-8: new high-speed USB device number 2 using xhci_hcd
tsc: Refined TSC clocksource calibration: 2591.995 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x255cb206edb, max_idle_ns: 440795262788 ns
clocksource: Switched to clocksource tsc
wmi_bus wmi_bus-PNP0C14:01: WQ data block query control method not found
wmi_bus wmi_bus-PNP0C14:01: WQ data block query control method not found
wmi_bus wmi_bus-PNP0C14:01: WQ data block query control method not found
wmi_bus wmi_bus-PNP0C14:01: WQ data block query control method not found
acpi PNP0C14:04: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:03)
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x10 impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part ems deso sadm sds apst
i801_smbus 0000:00:1f.4: SPD Write Disable is set
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
r8169 0000:08:00.0: can't disable ASPM; OS doesn't have ASPM control
intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
nvme nvme0: pci function 0000:07:00.0
idma64 idma64.0: Found Intel integrated DMA 64-bit
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
ata1: DUMMY
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xb462b000 port 0xb462b300 irq 130
nvme nvme0: missing or invalid SUBNQN field.
nvme nvme0: Shutdown timeout set to 8 seconds
libphy: r8169: probed
r8169 0000:08:00.0 eth0: RTL8168h/8111h, 80:fa:5b:6c:04:84, XID 541, IRQ 133
r8169 0000:08:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
r8169 0000:08:00.0 enp8s0: renamed from eth0
nvme nvme0: 12/0/0 default/read/poll queues
nvme0n1: p1 p2
usb 1-8: New USB device found, idVendor=04f2, idProduct=b685, bcdDevice=54.04
usb 1-8: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 1-8: Product: Chicony USB2.0 Camera
usb 1-8: Manufacturer: Sonix Technology Co., Ltd.
usb 1-10: new full-speed USB device number 3 using xhci_hcd
ata5: SATA link down (SStatus 4 SControl 300)
intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
idma64 idma64.1: Found Intel integrated DMA 64-bit
usb 1-10: New USB device found, idVendor=06cb, idProduct=00c7, bcdDevice= 0.00
usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 1-10: SerialNumber: bb30898c21e3
usb 1-14: new full-speed USB device number 4 using xhci_hcd
usb 1-14: New USB device found, idVendor=8087, idProduct=0aaa, bcdDevice= 0.02
usb 1-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0
EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 245.4-4ubuntu3 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
psmouse serio2: synaptics: queried max coordinates: x [..5662], y [..4730]
systemd[1]: Set hostname to .
psmouse serio2: synaptics: queried min coordinates: x [1278..], y [1122..]
psmouse serio2: synaptics: Your touchpad (PNP: PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Finished Uncomplicated firewall.
systemd[1]: modprobe@drm.service: Succeeded.
systemd[1]: Finished Load Kernel Module drm.
EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Activating swap /swapfile...
lp: driver loaded but no devices found
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
ppdev: user-space parallel port driver
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Mounting FUSE Control File System...
psmouse serio2: synaptics: Touchpad model: 1, fw: 9.32, id: 0x1e2a1, caps: 0xf00223/0x840300/0x2e800/0x500000, board id: 3449, fw id: 2864695
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Load/Save Random Seed.
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Finished Set the console keyboard layout.
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: Mounting Mount unit for core18, revision 1880...
systemd[1]: Mounting Mount unit for core18, revision 1885...
systemd[1]: Mounting Mount unit for gnome-3-34-1804, revision 33...
systemd[1]: Mounting Mount unit for gnome-3-34-1804, revision 36...
systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1502...
systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1506...
systemd[1]: Mounting Mount unit for snap-store, revision 454...
systemd[1]: Mounting Mount unit for snap-store, revision 467...
systemd[1]: Mounting Mount unit for snapd, revision 8140...
systemd[1]: Mounting Mount unit for snapd, revision 8790...
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input10
systemd[1]: Started Journal Service.
systemd-journald[407]: Received client request to flush runtime journal.
Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS
input: Intel HID events as /devices/platform/INT33D5:00/input/input13
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain dram
cfg80211: Loading compiled-in X.509 certificates for regulatory database
proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
pstore: Using crash dump compression: deflate
pstore: Registered efi as persistent store backend
mc: Linux media interface: v0.10
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
videodev: Linux video capture interface: v2.00
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cryptd: max_cpu_qlen set to 1000
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
usbcore: registered new interface driver btusb
uvcvideo: Found UVC 1.00 device Chicony USB2.0 Camera (04f2:b685)
Bluetooth: hci0: Bootloader revision 0.1 build 42 week 52 2015
Bluetooth: hci0: Device revision is 2
Bluetooth: hci0: Secure boot is enabled
Bluetooth: hci0: OTP lock is enabled
Bluetooth: hci0: API lock is enabled
Bluetooth: hci0: Debug lock is disabled
Bluetooth: hci0: Minimum firmware build 1 week 10 2014
iwlwifi 0000:00:14.3: WRT: Overriding region id 1
iwlwifi 0000:00:14.3: WRT: Overriding region id 2
iwlwifi 0000:00:14.3: WRT: Overriding region id 3
iwlwifi 0000:00:14.3: WRT: Overriding region id 4
iwlwifi 0000:00:14.3: WRT: Overriding region id 6
iwlwifi 0000:00:14.3: WRT: Overriding region id 8
iwlwifi 0000:00:14.3: WRT: Overriding region id 9
iwlwifi 0000:00:14.3: WRT: Overriding region id 10
iwlwifi 0000:00:14.3: WRT: Overriding region id 11
iwlwifi 0000:00:14.3: WRT: Overriding region id 15
iwlwifi 0000:00:14.3: WRT: Overriding region id 16
iwlwifi 0000:00:14.3: WRT: Overriding region id 18
iwlwifi 0000:00:14.3: WRT: Overriding region id 19
iwlwifi 0000:00:14.3: Found debug destination: EXTERNAL_DRAM
iwlwifi 0000:00:14.3: Found debug configuration: 0
iwlwifi 0000:00:14.3: loaded firmware version 46.6bf1df06.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm
iwlwifi 0000:00:14.3: Direct firmware load for iwl-debug-yoyo.bin failed with error -2
Bluetooth: hci0: Found device firmware: intel/ibt-17-16-1.sfi
uvcvideo 1-8:1.0: Entity type for entity Extension 3 was not initialized!
uvcvideo 1-8:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 1-8:1.0: Entity type for entity Camera 1 was not initialized!
input: Chicony USB2.0 Camera: Chicony as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input14
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
MXM: GUID detected in BIOS
ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20200326/nsarguments-59)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20200326/nsarguments-59)
pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
nouveau: detected PR support, will not use DSM
nouveau 0000:01:00.0: enabling device (0106 -> 0107)
checking generic (90000000 7e9000) vs hw (a0000000 10000000)
checking generic (90000000 7e9000) vs hw (b0000000 2000000)
checking generic (90000000 7e9000) vs hw (b5000000 1000000)
checking generic (90000000 7e9000) vs hw (90000000 10000000)
fb0: switching to inteldrmfb from EFI VGA
nouveau 0000:01:00.0: NVIDIA TU106 (166000a1)
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: vgaarb: deactivate vga console
iwlwifi 0000:00:14.3: Detected Intel(R) Wireless-AC 9560, REV=0x318
snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
iwlwifi 0000:00:14.3: base HW address: 3c:f0:11:fe:05:79
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain uncore
intel_rapl_common: Found RAPL domain dram
nouveau 0000:01:00.0: bios: version 90.06.2d.00.b5
nouveau 0000:01:00.0: fb: 6144 MiB GDDR6
[TTM] Zone kernel: Available graphics memory: 16295156 KiB
[TTM] Zone dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau 0000:01:00.0: DRM: VRAM: 6144 MiB
nouveau 0000:01:00.0: DRM: GART: 536870912 MiB
nouveau 0000:01:00.0: DRM: BIT table 'A' not found
nouveau 0000:01:00.0: DRM: BIT table 'L' not found
nouveau 0000:01:00.0: DRM: TMDS table version 2.0
nouveau 0000:01:00.0: DRM: DCB version 4.1
nouveau 0000:01:00.0: DRM: DCB outp 00: 01800f36 04600010
nouveau 0000:01:00.0: DRM: DCB outp 01: 01800f32 00020010
nouveau 0000:01:00.0: DRM: DCB outp 02: 04844f76 04600010
nouveau 0000:01:00.0: DRM: DCB outp 03: 04844f72 00020010
nouveau 0000:01:00.0: DRM: DCB outp 04: 02022f52 00020010
nouveau 0000:01:00.0: DRM: DCB conn 00: 00001046
nouveau 0000:01:00.0: DRM: DCB conn 02: 00010261
nouveau 0000:01:00.0: DRM: DCB conn 04: 01000446
nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
thermal thermal_zone6: failed to read out thermal zone (-61)
iwlwifi 0000:00:14.3 wlp0s20f3: renamed from wlan0
snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops nv50_audio_component_bind_ops [nouveau])
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
audit: type=1400 audit(1598215978.024:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=683 comm="apparmor_parser"
audit: type=1400 audit(1598215978.024:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=678 comm="apparmor_parser"
audit: type=1400 audit(1598215978.024:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=682 comm="apparmor_parser"
audit: type=1400 audit(1598215978.024:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=681 comm="apparmor_parser"
audit: type=1400 audit(1598215978.024:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=681 comm="apparmor_parser"
audit: type=1400 audit(1598215978.024:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=688 comm="apparmor_parser"
audit: type=1400 audit(1598215978.024:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=688 comm="apparmor_parser"
audit: type=1400 audit(1598215978.024:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=688 comm="apparmor_parser"
audit: type=1400 audit(1598215978.024:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=680 comm="apparmor_parser"
nouveau 0000:01:00.0: [drm] Cannot find any crtc or sizes
[drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
nouveau 0000:01:00.0: DRM: Disabling PCI power management to avoid bug
nouveau 0000:01:00.0: [drm] Cannot find any crtc or sizes
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Generic FE-GE Realtek PHY r8169-800:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-800:00, irq=IGNORE)
nouveau 0000:01:00.0: [drm] Cannot find any crtc or sizes
r8169 0000:08:00.0 enp8s0: Link is Down
nvidia-gpu 0000:01:00.3: i2c timeout error e0000000
ucsi_ccg 0-0008: i2c_transfer failed -110
ucsi_ccg 0-0008: ucsi_ccg_init failed - -110
ucsi_ccg: probe of 0-0008 failed with error -110
Bluetooth: hci0: Waiting for firmware download to complete
Bluetooth: hci0: Firmware loaded in 1404185 usecs
Bluetooth: hci0: Waiting for device to boot
Bluetooth: hci0: Device booted in 12696 usecs
Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-17-16-1.ddc
Bluetooth: hci0: Applying Intel DDC parameters completed
Bluetooth: hci0: Firmware revision 0.1 build 26 week 11 2020
NET: Registered protocol family 38
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
[drm] Initialized i915 1.6.0 20200313 for 0000:00:02.0 on minor 0
ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input21
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input22
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
vga_switcheroo: enabled
fbcon: i915drmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: i915drmfb frame buffer device
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1220: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28
input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input29
rfkill: input handler disabled
wlp0s20f3: authenticate with b0:2a:43:cd:08:31
wlp0s20f3: send auth to b0:2a:43:cd:08:31 (try 1/3)
wlp0s20f3: authenticated
wlp0s20f3: associate with b0:2a:43:cd:08:31 (try 1/3)
wlp0s20f3: RX AssocResp from b0:2a:43:cd:08:31 (capab=0x1011 status=0 aid=3)
wlp0s20f3: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready
wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by b0:2a:43:cd:08:31
rfkill: input handler enabled
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
rfkill: input handler disabled
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
wlp0s20f3: disconnect from AP b0:2a:43:cd:08:31 for new auth to b0:2a:43:cd:3d:21
wlp0s20f3: authenticate with b0:2a:43:cd:3d:21
wlp0s20f3: send auth to b0:2a:43:cd:3d:21 (try 1/3)
wlp0s20f3: authenticated
wlp0s20f3: associate with b0:2a:43:cd:3d:21 (try 1/3)
wlp0s20f3: RX ReassocResp from b0:2a:43:cd:3d:21 (capab=0x1011 status=0 aid=7)
wlp0s20f3: associated
wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by b0:2a:43:cd:3d:21
perf: interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset